Tips on punching in, light switch modification, mic flags, and fans
Many new installations use 110 blocks from ADC/Krone. With one major router manufacturer wiring them with a non-standard method, it is easy to get confused when troubleshooting or adding new sources and destinations to a system already up and running.
Howard Mullinack of SAS came up with an idea: Print a new template on Avery peel-off labels and place them over the plastic panel in the center of the Krone block. While there isn't much room for a complete description, it is enough to separate the multiple grounds hidden on pairs from the active audio pairs. Mitch Glider of Westwood One came up with an improvement: Print the peel-off templates in color. Red, black and green are easier to see and distinguish. And to clarify the block layout even more, Mitch covers the original pair numbers with White-Out.
Leave the light on
This photo was submitted by a reader of a solution he saw while visiting an office. It appears that someone wanted a way to have access to the light switch, but didn't want it turned off regularly or inadvertently. A small conduit hanger was installed over the switch. The holes in the hanger line up with the holes in the switchplate. The switch can still be turned on and off, but it takes a little more effort.
It's amazing how expensive some things have gotten. No I am not talking about gas, or copper, but mic flags! How many of them have gotten stolen at remotes? And how many do you have lying around with old letters or logos on them that the PD won't let you use?
Well the boss (our own editor Chriss Scherer) came up with a simple quick fix. Chriss needed a mic flag in a hurry for a last-minute interview. He took an old one he had lying around and removed the extinct logo with naptha. (Mineral spirits is another good choice. I do not recommend acetone because it can destroy the plastic if too much is used.) Wash the flag thoroughly once it's clean. He then printed new logos on 2" × 4" clear address labels in a color printer and placed them onto the now "naked" mic flag. Running a blade along the bottom edge trimmed the 4" long label to the proper length. While not as durable as the quality screened or printed versions, it does the job nicely.
As springtime gets warmer, so will your transmitter shack. Another spring chore at the transmitter is to make sure the fans, blowers and dampers are all working properly.
One suggestion to make blower maintenance easier came from a discussion at an SBE meeting: Install quick disconnects to simplify blower removal or inspection. In some cases, the blower may be connected with wire nuts, which are also convenient, but in time the wire ends will fray.
All blowers that require regular lubrication or belt replacement should have a manual disconnect switch nearby. And OSHA requires that switch be locked out and tagged out when a person is in working on a blower. Quick disconnects are good for convenience, but there is no substitute for safety.
Landry is an audio maintenance engineer at CBS Radio/Westwood One, New York.
Do you have a tech tip? Send it to us at radio@RadioMagOnline.com
Acceptable Use Policy blog comments powered by Disqus
[an error occurred while processing this directive]
Today in Radio History
The history of radio broadcasting extends beyond the work of a few famous inventors.
EAS Information More on EAS
The feed provides feeds for all US states and territories.
Need a calendar for your computer desktop? Use one of ours.
Information from manufacturers and associations about industry news, products, technology and business announcements.
This high-visibility and high-traffic area got the full acoustic treatment.
Browse Back Issues[an error occurred while processing this directive]
Also in the May Issue
- Remote Access and Site Connectivity: Wireless
- Standards of FM Allocation and Interference
- Side by Side: Mic Processors
- Field Report: Deva Broadcast DB4004
- Field Report: APT WorldCast Systems Horizon NextGen
- New Products
- 20 Years of Radio magazine: May 1994