Most Popular Articles
Braided Shield Cable Preparation
Braided-shield cables provide a flexible method of electrically
shielding a cable. The braid also adds strength to the cable. Because
of this, braided-shield cables are the best choice for cables used in
mobile, remote or live applications. The drawback to using a braided
shield, however, is the time and effort needed to prepare the cable for
attaching a connector.
The standard approach is to completely unbraid the shield to free the conductors inside, and then twist the shield conductors together. The photos below detail this method. While there is nothing wrong with this method, it is tedious to unbraid the shield. Pulling and twisting the individual wires of the braid also subjects them to a great deal of stress, which often weakens the wires, breaking some of them in the process. In addition, the reformed shield conductor tends to shed wires causing potential electrical problems later on.
An alternate method provides a cleaner way to prepare the shield without subjecting the wires to stress, and it results in a cleaner, more manageable shield conductor.
The Traditional Method
Strip the jacket. With a pointed tool, carefully separate the
Continue unbraiding the shield until it is completely fanned.
Remove any paper or plastic material between the braid and the conductors.
Twist the fanned shield into a single conductor.
The unbraided shield will have a natural twist to it. Try to follow this tendency.
Be careful not to break off the individual shield strands.
A Better Way
Strip the cable's jacket.
Push the braided shield away from the end of the wire to loosen the braid.
With a pointed tool, carefully push the strands to the side to make an opening in the braid.
Detail of the above instruction. Work slowly and the strands will move easily.
The size of the opening will depend on the flexibility of the inner conductors and your own skill.
Loop the tool around the conductors pull them through the opening in the braid. If there is a paper or plastic wrapper, you may be able to remove this before you create the opening in the braid.
Detail of the instruction above.
Continue pulling the conductors and filler through the opening.
The braided shield is now empty.
Detail of the note above showing all the conductors and filler pulled through the opening.
Cut the filler material.
Lightly squeeze and pull on the empty, loosened braid.
Detail of the above instruction. This step tightens the braid.
The cable is ready to be attached.
Detail of the finished effort.
The results of both methods. The pull-through method is on the left. The fanning method is on the right.
Photos by Marilyn Scherer
Acceptable Use Policy blog comments powered by Disqus
[an error occurred while processing this directive]
Today in Radio History
The history of radio broadcasting extends beyond the work of a few famous inventors.
Read each issue online in our Digital Edition Format in your Web browser.
EAS Information More on EAS
The feed provides feeds for all US states and territories.
Need a calendar for your computer desktop? Use one of ours.
Information from manufacturers and associations about industry news, products, technology and business announcements.
Minneapolis Public Schools upgrades their aging equipment with new Audio over IP technology
Browse Back Issues[an error occurred while processing this directive]
Also in the August Issue
- Trends in Technology: Work Smarter not Harder
- FCC Tees Up Some Late-Summer Business
- What’s “Next” for Radio?
- Field Report: JBL LSR308
- Tech Tips: How To Be in Two Places at Once