DTMF Information and Examples
In the early 1960s, AT&T introduced a method of providing
in-band signaling so telephone customers could place telephone calls.
The system was called dual-tone multi-frequency, or DTMF. AT&T,
through its Bell divisions, marketed the technology under the name
The DTMF system uses eight different frequency signals transmitted in pairs to represent sixteen different numbers, symbols and letters. The table below shows how the frequencies are organized. These frequencies were chosen to prevent harmonics from being incorrectly detected by the receiver as other DTMF frequencies.
The frequencies along the top are referred to as the High Group. The frequencies along the left column are called the Low Group. By transmitting one frequency from each group, a corresponding DTMF is created.
ANSI standards state that DTMF tones used in telephony must meet the following criteria:
The DTMF duration must be at least 50ms.
The inter-digit interval (silence) between tones must be at least 45ms.
The receiver should receive the DTMF digits with a signal strength of at least -25dBm and no more than 0dBm.
The energy strength of the high-group frequency must be -8 dB to +4 dB relative to the energy strength of the low-group frequency as measured at the receiver.
When the level between the two frequencies is not equal it is said to have a twist. Most modern equipment is fairly tolerant of unbalanced levels between tones.
The buttons below are hyperlinked to WAV files of their corresponding Touch-Tones.
Audio samples created by Carla Kay Barlow.
Acceptable Use Policy blog comments powered by Disqus
[an error occurred while processing this directive]
Today in Radio History
The history of radio broadcasting extends beyond the work of a few famous inventors.
Read each issue online in our Digital Edition Format in your Web browser.
EAS Information More on EAS
The feed provides feeds for all US states and territories.
Need a calendar for your computer desktop? Use one of ours.
Information from manufacturers and associations about industry news, products, technology and business announcements.
Staying on-air is priority #1, but 100 percent redundancy comes at a cost.
Browse Back Issues[an error occurred while processing this directive]
Also in the November Issue
- Music is Everywhere at WTMD
- FCC Looks to Update RF Exposure Rules
- Government Shutdown Causes FCC Delays
- Applied Technology: Wheatstone baseband192
- Side by Side: Video Cameras
- Exploring More from Google Earth
- The History of W9BSP