Remote Access and Site Connectivity: Wireless


        Radio on FacebookJoin us on Facebook

Getting an extension of your LAN to a transmitter site (or other remote site) is fairly easy if there are wire-based facilities there. That was our topic last month. However, some sites have no wire-line facilities of any sort, and that can leave you with a tough problem to solve. How does one get access to a studio LAN (and the Internet) from a remote site with no native connectivity? That's our topic this time around.

There are at least two different approaches to this problem. First, you can see if your remote site is covered by a local wireless ISP (WISP). Secondly, you can build your own system making use of unlicensed ISM band radios. We'll cover both methods.

As you stand at a transmitter site and contemplate the utter lack of wire-line facilities thereupon, take a look around you. What cities are near? Even though many transmitter sites are remote in the sense that there are no wire facilities and roads may be hazardous, clearly they're close enough to a town or towns that make up your audience. It's likely that one or more of those towns has a wireless Internet service provider. When you get back to the office, simply search online for the town plus wireless Internet service provider. I did this very thing recently as part of my work for Clear Channel in Los Angeles. We needed Internet access for our KSRY transmitter site near Tehachapi, CA. A quick online search showed that Creative Wireless is in business in the town of Tehachapi. Ultimately we received up/down speeds of around 3.5Mb/s from them - not bad at all, and more than adequate for the site. Of course since this is the public Internet, we'll be making use of the appropriate access and security techniques (discussed in last month's article).

"Sure," you say. "But that's in southern California. I'm in (fill-in-the-blank-here). We're really remote." Well, in an article I wrote for Radio magazine in August 2012 (radiomagonline.com/issue_20120801) I mentioned a WISP (called Wispernet) that covers Peace River, AB (among other towns). Peace River has a population of 6,750, and is located about 250 miles north of Edmonton. It provides a Layer-2 (Ethernet) connection to its clients CKHL and CKKX there. Some readers may be more remote, but my point is that there are almost always options.

Wireless options

The option that seems most familiar is probably using equipment provided by familiar manufacturers. One system worth looking at is the Intraplex HD Link from Harris Broadcast. It's a 950MHz radio system that passes not only the typical program audio, but also HD Radio traffic between a studio location and transmitter site. When integrated with an IP return path from the transmitter site back to the studio, the system will pass TCP traffic between the two ends, and will manage packet routing, based on the user configuration, and path accessibility. In other words, it has two network inputs: one for passing HD Radio traffic, and a separate used in conjunction with a return path for TCP traffic.

But, without the benefit of wire-line access to the transmitter site, how would one obtain a return path? That's where the 900MHz ISM band (or perhaps 2.4GHz or 5.8 GHz) comes in to play. As just one example, let's take a look at the AvaLAN AW900S. This radio operates in the 902-928MHz ISM band; has 12 non-overlapping channels to choose from; will achieve up to 935kb/s of data throughput (Ethernet interfaces) and will go down to a -97dBm signal level with a 10E-4 BER. Maximum TPO is +21dBm. User configuration is via an embedded Web browser. Antennas that will work for this path are easy to find; you might even have a set of antennas around (like a pair of lawn chairs) that could be used for the link.

Once a return link is established from the transmitter site, integrate it with the Intraplex HD Link in such a way that the radio system will route packets in the appropriate manner so that a duplex IP link is established. Another very familiar option for establishing a TCP/IP link to the transmitter site would be use of the Moseley LanLink. The LanLink Turbo version requires a set of external antennas. The LanLink includes a duplexer on both ends, which affords the user a convenient way to use 950MHz antennas that are already in place. (The current 950MHz radios loop through the duplexer.) Both versions operate in the 902-928MHz ISM band; data throughput up to 130Mb/s. Output power is +28dBm. Configuration is done via an embedded Web server; the unit supports SNMP as well.

Of course you may have no reasons whatsoever to use the 900MHz frequency range for your remote link; you could look at the 2.4 and 5.8GHz bands instead. Some of the available radios are TDM-based, so they have T1 (or perhaps even T3) interfaces. This is somewhat of an old-fashioned approach now, and would necessitate an Ethernet to TDM interface on both ends of the link. (This could be done with routers.) Some radios come with native TDM and Ethernet interfaces, allowing for the best of both worlds.

- continued on page 2



Acceptable Use Policy
blog comments powered by Disqus

[an error occurred while processing this directive]

Today in Radio History

Milestones From Radio's Past

The history of radio broadcasting extends beyond the work of a few famous inventors.

Digital Edition

Each Issue as a Digital Edition

Read each issue online in our Digital Edition Format in your Web browser.

EAS Information More on EAS

NWS XML/Atom Feed for CAP Messages

The feed provides feeds for all US states and territories.

Wallpaper Calendar

Radio 2014 Calendar Wallpaper

Need a calendar for your computer desktop? Use one of ours.

The Wire

A virtual press conference

Information from manufacturers and associations about industry news, products, technology and business announcements.

Join Us Facebook Twitter YouTube LinkedIn
Radio magazine cover

Current Issue

88Nine Radio Milwaukee

A New Home Brings Community Together

Browse Back Issues

[an error occurred while processing this directive]