Most tower companies follow a checklist when performing inspections. At a minimum your report should include details about the physical condition of the tower, including mounting hardware, connections, foundations and guy anchors if applicable. Also included in the physical condition should be comments on the paint or galvanizing as applicable, the tension and condition of guy wires, and alignment, that is plumb, of the tower. On the electrical side, issues with grounding, conduits and lighting should be investigated. For the RF portion, visible physical damage and anomalies to antennas, transmission lines, waveguides, insulators and skirts should be noted. In all cases, your crew should be ready and willing to provide adequate documentation including a robust quantity of photographs, which will ultimately protect both parties involved.
Inspection items uncovered during a climb may or may not be rectifiable during the current visit by the crew because of materials and/or personnel. Such items should, however, not be relegated to the back burner. Make necessary corrections at the earliest possible opportunity, which will probably reduce future catastrophes.
Not just a slap of paint
Perhaps one of the planned activities for tower maintenance that tends to be delayed or neglected is that of painting. A reasonable frequency of painting is probably every five to seven years. In certain environments, especially those that are corrosive due to ambient salinity from oceans or industrial pollution, this interval may need to be shortened considerably. Painting serves not only the obvious end of increasing structure visibility, but also provides a protective coating to the tower material. Failing to adequately maintain the paint on the tower increases the likelihood of aeronautical accidents or failure of the structure from corrosion.
Also often neglected is the removal of obsolete items from the structure. Sometimes these items belong to the station, but more often than not, they were installed by another tenant. Vertical real estate tenants sometimes have insufficient respect for the tower owners, and may consider your tower their own personal landfill. This situation can typically be avoided through appropriate language in the lease or licensing agreement they sign for use of the tower, but despite your best actions as a structure owners, some still slip through the cracks and the onus of removal falls to you.
Portions of the structure that lurk below ground can also sink the ship that is your station. Due to the significant increases in technology, equipment at the transmitter site can be just as susceptible to lightning as that at the studio. The necessity of installing and maintaining proper grounding cannot be understated.
Appearances can also be deceiving with guy anchors. This topic has gained a lot of attention in recent years due to spectacular failures, or the identification of impending failures. Although the anchor may look just fine above ground level, the portion below ground, or in concrete, may be a failure waiting to happen. All sites are at risk of galvanic corrosion of the guy anchors; however, those in proximity to pipelines face a much greater risk. Pipelines tend to charge their systems so that everything is deposited on pipeline as opposed to the reverse where the pipeline is deposited on the guy anchors. This means that guy anchors, and even ground systems, wind up migrating to the pipeline. This situation can be rectified through various schemes that employ a sacrificial anode. These systems, however, require maintenance, but are much cheaper to replace than towers.
With some forethought and prior planning, you can significantly reduce the potential of that dreaded phone call. While proper tower maintenance will not prevent all failures, it will certainly go a long way towards reducing their potential of occurrence.
Ruck is a senior engineer with D.L. Markley and Associates, Peoria, IL.
Acceptable Use Policy blog comments powered by Disqus
[an error occurred while processing this directive]
Today in Radio History
The history of radio broadcasting extends beyond the work of a few famous inventors.
EAS Information More on EAS
The feed provides feeds for all US states and territories.
Need a calendar for your computer desktop? Use one of ours.
Information from manufacturers and associations about industry news, products, technology and business announcements.
Staying on-air is priority #1, but 100 percent redundancy comes at a cost.
Browse Back Issues[an error occurred while processing this directive]
Also in the November Issue
- Music is Everywhere at WTMD
- FCC Looks to Update RF Exposure Rules
- Government Shutdown Causes FCC Delays
- Applied Technology: Wheatstone baseband192
- Side by Side: Video Cameras
- Exploring More from Google Earth
- The History of W9BSP