Field Report: Broadcast Devices DAB-300
For years the New York Clear Channel stations transmitting from the Empire State Building used BDI 3×2 composite switches to change STL feeds as necessary. With HD Radio, then PPM and finally our studio consolidation, we decided it was time to upgrade the capability of our STL switches so that several new requirements could be met: We now feed programming to our analog and HD Radio transmitters; Arbitron was pressing us to match PPM sources between analog and our primary (simulcast) digital; and we also wanted automated "smart" switching between three different sources.
I made up a block diagram of a switcher that would do what we needed. New York Director of Engineering Josh Hadden suggested I talk to Bob Tarsio of BDI to see if the company would build this new device for us. We needed five of them. I ran it past Tarsio and his team, and they proposed a semi-custom version of the ATB-300 Audio Toolbox, which became the DAB-300.
At its most basic, the DAB-300 is an automated AES3 switcher that will choose one of four AES3 inputs, and route it to all four AES3 outputs, based on basic configuration parameters. All inputs and outputs are 110ohm AES3. The unit occupies 1RU and is 10.25" deep. As you can imagine, rear apron space is limited, so the inputs and outputs are brought out to a breakout panel, which itself is 1RU. The remote controls are accessed via DB-25 connectors on the rear of the DAB-300.
When used in manual mode, the unit operates like any other switcher. Select the input on the front panel and press the take button. Beyond that, there are options to modify the signals that come in to and go out of it. Looking at each individual input, the following options are available:
|Performance at a glance|
Programmable silence threshold
Front-panel menu programming
Inputs: 4 analog composite, 4 AES3
Synchronous AES switching between sources
SRC on all inputs up to 96kHz
Selectable output SR 32, 44.1, 48kHz
Programmable alarm contacts
This capability exists on each input; the settings are not global. In addition, each of the four outputs can be adjusted individually for gain (+/-10 dB). The output sample rate is set globally by dip switch settings inside the DAB-300.
In its auto mode, there are several parameters that must be set: silence threshold and time delay. Both are configured via the front panel. (On our units, the time delay can be set as low as 10 seconds.) The scale on the threshold is linear, so I did my best to match it with what I consider silence to be. You also tell the unit if you want it to revert or not. When the unit I set in its auto mode, it will seek a source of audio on one of its other inputs in the event that it detects silence (either composite or AES3) on its primary input. If you configure revert mode, it will seek back to the primary audio source after a timeout period (which you also configure via the front panel).By the way, you can change your selection of the primary source dynamically via the front panel. Whatever source is picked prior to selecting auto mode becomes the primary. This is handy in case what you normally consider to be the primary goes out of service or becomes temporarily problematic (for any number of reasons).
-- continued on page 2
Acceptable Use Policy blog comments powered by Disqus
[an error occurred while processing this directive]
Today in Radio History
The history of radio broadcasting extends beyond the work of a few famous inventors.
Read each issue online in our Digital Edition Format in your Web browser.
EAS Information More on EAS
The feed provides feeds for all US states and territories.
Need a calendar for your computer desktop? Use one of ours.
Information from manufacturers and associations about industry news, products, technology and business announcements.
Staying on-air is priority #1, but 100 percent redundancy comes at a cost.
Browse Back Issues[an error occurred while processing this directive]
Also in the November Issue
- Music is Everywhere at WTMD
- FCC Looks to Update RF Exposure Rules
- Government Shutdown Causes FCC Delays
- Applied Technology: Wheatstone baseband192
- Side by Side: Video Cameras
- Exploring More from Google Earth
- The History of W9BSP