Field Report: Inovonics INOmini 632
This unit isn't coming close to a CSX line any time soon. As thoroughly articulated in the user's manual, the 632 is extremely simple to understand and operate. There's a single knob for navigation and control. Turn the knob to move a flashing cursor, press the knob to select, turn the knob to adjust, and then press again to set/exit. Receiver mode can be manually selected and "forced": analog stereo (blend or no blend), analog mono, HD-1, HD-2, or HD-3 all the way (theoretically) to HD-8. Considering that a very common implementation of FM HD Radio with multicast uses three digital channels, (HD-1 to HD-3), the INOmini size makes it so all an FM station's digital on-air channels can be monitored in a single rack space (and with a single power plug, but more on that later). For a small monitor, the 632 display can show an impressive amount of information. The normal, idle display shows the frequency, mode (FM:M/S, HD-1 ... HD-8), RBDS PI Code (raw and decoded per NRSC-4 specifications) when in analog mode and or name field on HD Radio mode. The small signal strength meter changes to a DQ (digital quality) meter in HD Radio mode.
When an alarm condition occurs such as the station losing the HD Radio signal, audio failure or carrier failure, the front panel flashes Low Signal, Audio Loss or HD Loss, and also triggers the appropriate alarm outputs on the rear panel. Even if the alarm outputs are not used, the flashing front panel should attract the attention of a passing engineer. Pressing the front panel knob mutes the display but the rear panel alarm remains triggered and will do so until the alarm condition is cleared (digital carrier, audio or analog carrier restored).
Beyond HD Radio
Although the device isn't specifically an RBDS or HD Radio PAD data analysis tool, the most common and visible RBDS Data and HD Radio PAD fields can be manually selected and displayed. If, for example you are tweaking RBDS transmission percentages, field padding, repetition rates, individual fields can be cleared and redisplayed. In FM analog mode, the PI code display even seems to clear and redisplay each time the receiver decodes the transmission. Even Radiotext + fields are displayed and there are similar pages for the similar HD Radio PAD fields (name, type, artist, title). These features are a big improvement over waiting for consumer RDS or HD Radio display time-outs and display refreshes. As stations get more sophisticated in how their HD Radio PAD and RBDS data is used, this can become a very useful feature for spot checks.
The carrier loss alarm trigger level is set immediately below the signal strength meter on the same display page. The audio loss (silence sense) alarm can be disabled or a delay can be set from 1-120 seconds. There's no adjustment for HD loss but the alarm will trigger if HD Radio mode is selected and after a delay of a few seconds after loss of digital signal.
Many of us have anticipated the release of the 632 ever since it was awarded a Radio magazine Pick Hit, but sale of the unit was pending certification by iBiquity. What made certification difficult was that certain features critical to HD Radio's success on a consumer level are actually limitations for professional equipment. Fortunately the 632 was licensed by iBiquity in January 2012 under a "limited certification" because of the following variances, specified in the unit's documentation:
◊ The Inovonics 632 displays only four characters of call sign (not all six characters as defined in the requirements.)
◊ The Inovonics 632 displays only 39 characters of artist (not 64 characters as defined in the certification requirements supporting the ID3v2.3 standard.)
◊ The Inovonics 632 displays only 39 characters of title (not 64 characters as defined in the certification requirements supporting the ID3v2.3 standard.)
In addition the 632 is inhibited from blending to analog. This means the 632 is actually a real, honest-to-goodness air monitor for the digital channels. The receiver can be set to avoid the typical consumer analog stereo blend. I've excerpted the user's manual a couple of times. The excellent technical writing is worth recognition. For such a simple, easy-to-use device, the user's manual is exceptionally complete and accurate. For all this I thank Inovonics. There are two items I would like to see added. The selection between FM and HD modes is done from the idle display, however the FM stereo/mono/blend/no-blend selection is done a few pages away in the menus. It would be useful for the initial mode selection to be in one place: FM auto, mono, stereo, HD-1, etc., even if the blend setting were in a different menu location.
I would also like to see IP integration. Either an internal network connection or an optional, add-on device that would echo the alarm functions using SNMP, maybe even an email or SMS client to send alarms. It's likely that either of my desired features may not be possible within the reasonable price point offered for the monitor. The features above in no way detract from an otherwise excellent monitoring product for analog but especially for FM HD Radio channels.
For the use of cost-effective, dedicated HD Radio monitoring, the INOmini 632 is a problem-solver that I expect will become a fixture at stations nationwide very soon.
Thomas is vice president of engineering, Lincoln Financial Media, Atlanta.
Acceptable Use Policy blog comments powered by Disqus
[an error occurred while processing this directive]
Today in Radio History
The history of radio broadcasting extends beyond the work of a few famous inventors.
EAS Information More on EAS
The feed provides feeds for all US states and territories.
Need a calendar for your computer desktop? Use one of ours.
Information from manufacturers and associations about industry news, products, technology and business announcements.
This high-visibility and high-traffic area got the full acoustic treatment.
Browse Back Issues[an error occurred while processing this directive]
Also in the May Issue
- Remote Access and Site Connectivity: Wireless
- Standards of FM Allocation and Interference
- Side by Side: Mic Processors
- Field Report: Deva Broadcast DB4004
- Field Report: APT WorldCast Systems Horizon NextGen
- New Products
- 20 Years of Radio magazine: May 1994