Most Popular Articles
DM Engineering Audio-Pod
Engineers are always looking for problem solvers. If you're responsible for engineering remote broadcasts, the Audio-Pod from DM Engineering is one such problem solver.
As our ability to deliver high quality remote broadcasts from just about anywhere has developed, morning shows, sports discussion shows, political talk shows and the like are moving out of the studio and into the field. And while these are technically remote broadcasts, show hosts and their guests need the same amenities they have in the studio. Engineers meanwhile are more pressed for time and looking for ways to provide those amenities while simplifying and speeding the remote setup. That's where the Audio-Pod system really shines.
The Audio-Pod system includes up to four Audio-Pod modules and a power supply capable of powering four modules. Power hookup to each module is via standard eight-pin PS2 style cables and 10' cables were supplied.
The Audio-Pod system combines several tools into a sturdy plastic case. The microphone section includes a low-noise preamplifier with a rear-panel variable gain control that can be adjusted to any level from microphone to line output. Connection to the microphone input and output is via standard XLR connectors. There is also on-board switch-selectable phantom power. Large LED-lighted on and off switches are included with cough-mute logic integrated into the microphone on button. A small red LED is mounted on the top of the unit to indicate when the microphone is turned on. There is also rear panel output logic to drive external indicators. The microphone's on/off functions can also be remotely controlled.
|Performance at a glance|
|Mic preamp and headphone amp
Remote control of all functions
Phantom powered mic input
1/4" and 3.5 mm headphone jacks
VCA-controlled headphone amplifier
The integrated headphone amplifier contains some interesting and useful features. First, the headphone gain is controlled by a voltage-controlled amplifier (VCA) and includes a rear-panel trimpot to set the maximum allowable gain. A small pushbutton switch is included to select between low and high impedance headphones. Another switch inverts the phase of the headphone feed 180 degrees. This is useful where bone conduction phase cancellation is an issue.
The headphone output is via standard ¼” and 3.5mm jacks located on the front panel. On my model, the headphone feed input was connected via a Euro style terminal on the rear panel.
Use on remote
WLOH presents a weekly one-hour talk show from a different business location each week. We use a POTS codec for these broadcasts and while our audio quality is good, each location presents its challenges. I have been using four microphones fed directly into a mixer with a built-in compressor. I decided to integrate the Audio-Pod system into this setup.
I adjusted the Audio-Pod's microphone gain for a -6dB output to feed the mixer's line inputs. For an average voice, this gave me a 3/4 fader position with plenty of gain available for the soft talkers. The Audio-Pod instruction manual mentions that the FET switching can be overloaded if excessive gain is used. I had no problems at all even when I turned up the preamplifier output to 0dB. Overall the sound quality of the microphone preamplifier is very good.
Acceptable Use Policy blog comments powered by Disqus
[an error occurred while processing this directive]
Today in Radio History
The history of radio broadcasting extends beyond the work of a few famous inventors.
EAS Information More on EAS
The feed provides feeds for all US states and territories.
Need a calendar for your computer desktop? Use one of ours.
Browse Back Issues[an error occurred while processing this directive]
Also in the July Issue
- Trends in Technology: Robust IP STL
- LPFM on The March
- RF Engineering: Modern Modulation Techniques
- Field Report: Tascam TH-2000 Headphones
- Battery Maintenance: Testing and Charging