Most Popular Articles
You may not be familiar with the term Multiprotocol Label Switching (MPLS); however, it is a technology that that will find a way into your facility in the not-too-distant future, if not already utilized. What exactly is MPLS? At the highest level, MPLS is a highly scalable alternative method to route different types of data through a common network. In a broadcast environment MPLS would permit the mixture of protocols, including those used for video, audio and traditional IP traffic, over the same network. MPLS is typically deployed within a wide area network (WAN) and can be provisioned using copper, fiber or wireless microwave radio transport media.
The roots of MPLS go back to 1996 when a group from Ipsilon Networks proposed a technology called IP Switching, which at the time, was designed to only work on ATM networks. Cisco was the first to call it Label Switching, which was introduced as a similar proprietary protocol. In 1997 the first MPLS working group was formed and the first deployment of an MPLS network was completed in 1999.
MPLS has been closely compared to an ATM (Asynchronous Transfer Mode) network, and while it shares some of the same characteristics - i.e. connection oriented transport services - they are very different. Perhaps most notable is that ATM can only handle fixed-sized packets, while MPLS can work with a multitude of protocols and data packet sizes. MPLS networks tend to be more secure as they can broadcast specific packets of data to specific destinations as opposed to an IP network broadcast, which provides little security over who might be able to receive data.
About label switching
Conventional IP routing typically works in Layer 3 of the OSI model, otherwise called the Network layer. You may recall that this is the portion of the OSI stack responsible for forwarding data packets, including the addressing, forwarding and routing functions. IP routing also requires a great deal of management to track the source and destination addresses in order for the data packets to be routed to the proper destinations in the most efficient manner. While IP routing can be very efficient there is still a high degree of latency (relatively speaking) due to this management overhead.
Unlike IP routing, MPLS utilizes so-called labels to send data frames to other MPLS networks. Not unlike the typical information that encapsulates data packets in an IP network, labels contain certain information about the data; however, they are not made part of the original IP packet, rather they are inserted between Layers 2 (Data Link) and Layer 3, in essence tagging the MPLS stack to the beginning of the IP packet. I use the term stack because the label is essentially a virtual layer within the OSI stack between Layer 2 and 3. Some people refer to MPLS as Layer 2.5. It is also possible to stack more than a single label, which is used in certain routing applications.
The label consists of the following information:
The label: 20 bits (which can yield approximately 1 million different labels)
Class of service: 3 bits. This provides the ability to prioritize up to 7 different levels of traffic.
Stack bit: 1 bit. This defines whether or not this is the last MPLS Label in the frame. Remember I mentioned that there can be multiple labels in a frame.
Time-to-live: Defines how many different MPLS routers can be traversed before the packet dies.
- continued on page 2
Acceptable Use Policy blog comments powered by Disqus
[an error occurred while processing this directive]
Today in Radio History
The history of radio broadcasting extends beyond the work of a few famous inventors.
Read each issue online in our Digital Edition Format in your Web browser.
EAS Information More on EAS
The feed provides feeds for all US states and territories.
Need a calendar for your computer desktop? Use one of ours.
Information from manufacturers and associations about industry news, products, technology and business announcements.
When building its new broadcast production vehicle, MRN applied lessons learned from the past.
Browse Back Issues[an error occurred while processing this directive]
Also in the April Issue
- Update on Transmitters
- On-air Missteps to Avoid
- Tower Lease Renegotiation
- New Products
- Applied Technology: Streaming with the MPEG HE-AAC Audio Codec
- Side by Side: Studio Furniture
- Practical Use: Circulators and Isolators