How to set LNB power


        Radio on FacebookJoin us on Facebook

Recently several of the major networks have upgraded their satellite delivery platforms. These new systems are from three incompatible vendors, but all have similar features — such as addressability and remote store and forward capabilities. They also have analog RF signals that are much more fragile than their predecessors. It is possible to have a legacy receiver working properly on a particular satellite dish while a new generation receiver shows a marginal signal (or no signal at all) from the same dish. Should you encounter this problem the first thing to do is remove any inline amplifiers or amplified splitters. Some of these amplifiers have increased the noise floor on a satellite feed to the point that the newer receivers can't recoginze the RF. Wherever possible, feed the new receiver with a direct feed off the LNB. Then split that signal to feed the legacy equipment.

Inline power for the LNB of a satellite dish should be provided by an external power supply if you intend to feed multiple receivers from it. This is also a good idea if you have a long (300' or more) cable run between the receiver and the dish. All of the new generation receivers have a selectable LNB power feed option, and it should be switched off if you don't use it. Selecting this option is easy:

Wegener Ipump

Wegener Ipump

For the Wegener Ipump:
On the Front Panel:

  • Press the right arrow button until the display reads "unit setup." Press enter.
  • Press the right arrow button until the display reads "transport in setup." Press enter.
  • Press the right arrow button until the display reads "LNB power." Press enter.

    IDC Max

    IDC Max

    For the IDC Max:
    On the Front Panel:

  • Press check mark
  • Press up arrow 15 times until it says LNB.
  • Press right arrow
  • Press check mark
  • Press up arrow to change Disabled/Enabled
  • Press check mark to save

    A similar choice exists in the X-Digital Pro-4 receiver menu.


    Landry is an audio maintenance engineer at CBS Radio/Westwood One, New York.


    Do you have a tech tip? Send it to us at radio@RadioMagOnline.com




  • Acceptable Use Policy
    blog comments powered by Disqus

    [an error occurred while processing this directive]

    Today in Radio History

    Milestones From Radio's Past

    The history of radio broadcasting extends beyond the work of a few famous inventors.

    EAS Information More on EAS

    NWS XML/Atom Feed for CAP Messages

    The feed provides feeds for all US states and territories.

    Wallpaper Calendar

    Radio 2014 Calendar Wallpaper

    Need a calendar for your computer desktop? Use one of ours.

    The Wire

    A virtual press conference

    Information from manufacturers and associations about industry news, products, technology and business announcements.

    Join Us Facebook Twitter YouTube LinkedIn
    Radio magazine cover

    Current Issue

    KBEM-FM: Revitalizing a Station, Reviving a School

    Minneapolis Public Schools upgrades their aging equipment with new Audio over IP technology

    Browse Back Issues

    [an error occurred while processing this directive]