The new talk of the town

        Radio on FacebookJoin us on Facebook

A major provider of syndicated talk programming and home to well-known personalities including Bruce Williams, Doug Stephan, Mort Crim, Heloise and Barry Farber, Talk America Radio Networks has completed its new studio complex in Newark, NJ. This was a studio move on a grand scale, taking the network operation more than halfway across the country from its previous location in Las Vegas.

Talk America, owned by IDT Media, a division of IDT Corporation, moved to the East Coast to consolidate several IDT business divisions into one location, allowing them to share facilities and resources, including studios and other technical facilities. There are three control rooms. Two rooms are designed for on-air use, while the third is used mainly for production. If needed, any studio can be used to feed programming to the satellite uplink.

Studio A is the largest studio and includes an 18-fader console and call screener booth.

While this installation looks similar to most radio facilities, it has its own unique aspects. Creating network trigger tones is the biggest difference between this facility and a traditional radio facility. The studio move allowed Talk America to change how it deals with generating these tones and keeping the schedule running on time.

The facility's audio is stored and delivered with a Mediatouch system. While the company has installed numerous systems for stations that receive satellite-delivered programming, this was the first time that the system was being used by a program originator.

Breaking away from its old ways, and eliminating many of the common problems associated with satellite programming, Talk America uses the Mediatouch system to generate the cue tones. Mediatouch did not have to modify its software in any way. Instead, some operational methods were applied to allow the system to generate the cue tones and automatically schedule the fixed breaks.

The production studio is the smallest studio. The console, which sits on the tabletop and is connected by a few cables, can be placed wherever it is needed when the room is in use.

The local spot breaks are on a fixed time schedule. To eliminate slight variations in timing, these breaks are initiated by the Mediatouch system. As a break approaches, a bumper begins to play automatically, increasing in level to the final post. Likewise, once a break has ended, the rejoiner is played.

Profanity delay operation is also handled through the automation system. The first five minutes of each hour are covered by a newscast, which needs to be in real time. When the top of the hour approaches, the automation system plays the show's theme to the end and then dumps the delay, instantly joining real time. At the same instant, the newscast begins. Once the news has finished, the show begins again and delay is slowly added.

Satellite studios

Of all the programs carried by Talk America, only one host is actually in the studio facilities. The others contribute their shows from remote locations through ISDN codecs. The ISDN return carries a low-delay, mix-minus feed and an IFB. Additionally, some hosts have complete access to the Telos Assistant Producer call screening software through the data connection. The hosts have access and control of their callers, the same as if they were in the studio with the telephone equipment.

All the audio events are handled through the main studio. At the heart of the audio routing and switching is a Logitek Audio Engine. Each air studio has three ISDN codecs available for the greatest flexibility.

The Talk Studio is set up with minimal equipment between the host and the guest, which makes guests feel more comfortable.

The smaller production studio is designed around the DAW. The console, a Logitek Remora, is used primarily for line selection and level control of signals feeding the DAW. It is often pushed out of the way during a production session. If necessary, the production studio can feed the network.

When a host plans to take time off, the network prefers to not rerun previously aired shows. Instead, a live show is prepared off line and played back in the time slot.

There are two primary on-air control rooms. Studio A also has a call-screener station. The facility's rack room is in the corporate data center, which is about 300 feet from the studios. It houses five racks and 150 punch blocks.

Studio A boasts as the largest console configuration with 18 faders on the control surface. Studio B houses a 12-fader control surface. The production studio has a four-fader control surface.

Studio B, the mid-size studio, has a similar look and layout as Studio A. Any studio can be used to put the remote hosts’ programs on the air.

There are no system computers in any of the studios. The studios are connected to their computers through Cybex extenders. In case of an automation system failure, there are mirrored Mediatouch systems running in tandem for complete redundancy. If one system fails, the other can be brought up to take control. As a further safeguard, the network tries to run backup programs on the second system in case a show host's ISDN connection is lost. Also, to aid troubleshooting, one Mediatouch OpLog system is set up as a receive station to verify that all tones and cues are being sent and received properly.

The completed audio program and its embedded cue tones are sent to ABC Satellite Services to be uplinked. Program audio for both channels is sent via a T1 on the Harris IntraPlex system with an ISDN backup ready to go if needed.

Talk America's new facilities are designed to serve the needs of the network, as well as some additional demand from its collocated parent company. The network currently serves nearly 1,000 affiliates, and boasts one of the most varied lineups of talk shows available during its weekday service.

Equipment List
Airtools 6100 delay
AKG K141 headphones
Antex LX-44 audio cards
Aphex 120A distribution amplifier
Aphex Compellers
Arrakis furniture
Belden 1854F wire and cable
Comrex Matrix w/ ISDN
Comrex Nexus ISDN codec
Conex tone generators and decoders
Cybex KVM extenders
Denon DN 720R cassette
ELO TouchSystems monitors
EV RE27 mics
Eventide BD500 delay
Fostex rack-mount monitors
Furman power conditioners
Gentner DH30 hybrid
Gepco Gep-flex wire and cable
Hafler P1000 amplifier
Harris IntraPlex T1 interface
JBL 4410 studio monitors
Logitek Audio Engines
Logitek Numix and Remora consoles
LPB Silent Mic Booms and risers
Mediatouch automation system
Microboards Disc Factory CD burner
Microboards Orbit II CD burner
Microboards StartRec 400 CD burner
Middle Atlantic furniture
Middle Atlantic rack accessories
Middle Atlantic racks
MXL 2003 mics
NEC MultiSync LCD1700M+ monitors
OMT iMedialogger
Presonus ACP88 compressor limiters
Presonus M80 mic processors
Presonus MP20 mic processors
Rimage Auto Everest CD printer
Sony CDPXE370 CD players
Sony MDSE12 Minidiscs
Symetrix 506E headphone amps
Syntrillium Cool Edit Pro
Telos Assistant Producer software
Telos Desktop Director phones
Telos Twox12 ISDN phone system
Telos Zephyr Xstream ISDN codecs
Tieline Commander w/ ISDN Card

Acceptable Use Policy
blog comments powered by Disqus

[an error occurred while processing this directive]

Today in Radio History

Milestones From Radio's Past

The history of radio broadcasting extends beyond the work of a few famous inventors.

EAS Information More on EAS

NWS XML/Atom Feed for CAP Messages

The feed provides feeds for all US states and territories.

Wallpaper Calendar

Radio 2014 Calendar Wallpaper

Need a calendar for your computer desktop? Use one of ours.

The Wire

A virtual press conference

Information from manufacturers and associations about industry news, products, technology and business announcements.

Join Us Facebook Twitter YouTube LinkedIn
Radio magazine cover

Current Issue

National Public Radio

Building For The Future

Browse Back Issues

[an error occurred while processing this directive]