Most Popular Articles
Applied Technology: Vycon Flywheel Systems
While many things are changing in radio, one thing is certain. Electrical power is the lifeblood of broadcasting. A momentary glitch in power can result in dead air that pushes listeners to change stations - resulting in revenue reduction for advertisers and negatively impacting ratings. The challenge is that radio transmission systems are notoriously difficult to protect against power anomalies because of their sensitivity to even the smallest disruption. Analog and digital transmitters, audio consoles and networking systems all require clean, continuous power to operate at optimum levels.
Traditionally, these systems are protected by battery-based uninterruptible power systems (UPSs). These systems are effective in mitigating power interruptions and conditioning dirty power. However, broadcast engineers are finding that by adding flywheel energy storage in place of UPS's lead-acid batteries, power reliability is significantly increased, green initiatives are advanced and total cost of ownership of the UPS systems are lowered.
UPS batteries are chemically based. This means that frequent battery maintenance, testing, cooling requirements, weight, toxic and hazardous chemicals and disposal issues are key concerns. One dead cell in a battery string can render the entire battery bank useless - not good when you're depending on your power backup system to perform when you need it most. Every time the batteries are cycled, even for a split second, the more likely it is that they will fail the next time they are called upon.
A chemical-free alternative
Many broadcasters are depening on flywheel energy storage systems especially when energy efficiency, costs, space and environmental impact are concerns. This green technology is solving sophisticated power problems that challenge broadcasting operations every day. According to the Meta Group, the cost of downtime can average a million dollars per hour, so engineers can't afford to take any risks. Flywheels used with three-phase double-conversion UPS systems provide reliable mission-critical protection against costly transients, harmonics, voltage sags, frequency deviations, spikes and total power failures.
How they work
Flywheel technology stores kinetic energy in a quiet, spinning disk to provide a reliable and predictable source of dc power. With recent advances that have made it more compact and able to support higher power applications, flywheel technology has emerged as a reliable, environmentally friendly power protection solution that stores energy mechanically instead of chemically - greatly enhancing dependability.
A flywheel system replaces lead-acid batteries and works like a dynamic battery that stores energy kinetically by spinning a mass around an axis. It is designed for high power, short duration applications. Electrical input spins the flywheel rotor up to speed, and a standby charge keeps it spinning 24/7 until called upon to release the stored energy (See Figure 1). The flywheel hub is formed from aerospace-grade steel and a high-speed permanent magnet motor/generator, contact-free magnetic bearings that levitate 100 percent and sustain the rotor during operation. This allows the rotor hub to spin with no metal contact, eliminating bearing wear, bearing oiling or greasing or maintenance and no bearing replacements required for the life of the flywheel. What this means is a more reliable backup power solution. The flywheel can charge and discharge at high rates for countless cycles without degradation throughout its 20-year life - unlike traditional batteries. The amount of energy available and its duration is proportional to its mass and the square of its revolution speed. In the flywheel world, doubling mass doubles energy capacity, but doubling rotational speed quadruples energy capacity:
E = k M ω2
k - Depends on the shape of the rotating mass
M - Mass of the flywheel
ω - Angular velocity
- continued on page 2
Acceptable Use Policy blog comments powered by Disqus
[an error occurred while processing this directive]
Today in Radio History
The history of radio broadcasting extends beyond the work of a few famous inventors.
Read each issue online in our Digital Edition Format in your Web browser.
EAS Information More on EAS
The feed provides feeds for all US states and territories.
Need a calendar for your computer desktop? Use one of ours.
Information from manufacturers and associations about industry news, products, technology and business announcements.
Browse Back Issues[an error occurred while processing this directive]
Also in the March Issue
- The "And More" of Automation
- FCC Enforcement Items to Watch
- Testing AM Antennas
- New Products
- Field Report: Cloud Microphones Cloudlifter CL-1
- New Products at the 2014 NAB Show
- Side by Side: IP Codecs