Cutting Holes in Laminate


        Radio on FacebookJoin us on Facebook

Last month I talked about drilling holes in Corian countertops. There are probably more sets of studio furniture out there with laminate tops though, so let's talk about drilling holes in those.

I put the following question to Rod Graham of Graham Studios. What's the best way to cut holes in laminate furniture?

Forstner bits

Forstner bits


"Most often we see the use of a Forstner Bit when precision is required. While these bits are primarily used in a drill press, with a little practice, they can be used in a hand held drill. They are similar to other drills in that they have a center point to help start the hole. The outer rim however, is the guide to ensuring that holes greater than 2" in diameter, are perpendicular to the surface. While Forstner bits are more expensive than center point drills, they create cleaner and larger holes than the center point drill. A less expensive hole saw/arbor can be substituted for the Forstner bit. Buy two or more saws as they will get dull half way through the first hole."

What about larger holes, though, like one that would be beneath an equipment turret?

"The use of a router and template is the best way to cut holes in laminate (HPL) table tops. The template is clamped to the surface to prevent movement, and the router is then used to plunge through the top. This method is usually used in professional mill work environments where dust collection systems are used. Rectangles can also be cut with a jig saw, a steady hand, and 1/4" holes at the corners. Use 2" wide masking tape to prevent chipping of the laminate, as well as scratches from the base plate of the jig saw. Some black paint will dress up the non-standard hole."


Irwin is RF engineer/project manager for Clear Channel Los Angeles. Contact him at doug@dougirwin.net.




Acceptable Use Policy
blog comments powered by Disqus

[an error occurred while processing this directive]

Today in Radio History

Milestones From Radio's Past

The history of radio broadcasting extends beyond the work of a few famous inventors.

Digital Edition

Each Issue as a Digital Edition

Read each issue online in our Digital Edition Format in your Web browser.

EAS Information More on EAS

NWS XML/Atom Feed for CAP Messages

The feed provides feeds for all US states and territories.

Wallpaper Calendar

Radio 2014 Calendar Wallpaper

Need a calendar for your computer desktop? Use one of ours.

The Wire

A virtual press conference

Information from manufacturers and associations about industry news, products, technology and business announcements.

Join Us Facebook Twitter YouTube LinkedIn
Radio magazine cover

Current Issue

The Motor Racing Network Takes to the Road

When building its new broadcast production vehicle, MRN applied lessons learned from the past.

Browse Back Issues

[an error occurred while processing this directive]