Most Popular Articles
WILQ rebuilds transmitter site
A joy ride becomes a prolonged project for WILQ.
We purchased a Tunwall TRC-1 controller for the Dielectric antenna switch. It was at this point that Gurzynski would begin the cleaning of the HT-5 and subsequent testing into the Bird dummy load. Utility power was not available in the new building yet, but we did have the original Onan power generator and its new transfer switch installed along with all the rest of the ac power infrastructure. The generator was load tested to assure its reliability and it too came away from the destruction of the old building unscathed. It was this setup that afforded Gurzynski the ability to begin the testing.
By March 2009 the pre-wiring effort to complete as much as we could proved advantageous when it came time to cut over to the new building. In keeping with this theme, we purchased a BDI analog composite DA and a new Armstrong X-Link STL receiver. This would leave only the transmission lines and the Burk ARC-16 remote control to be removed from the temporary shed and put into the new building. A relay panel for the ARC-16 was pre-wired in the new building to ease the move. We would then be operating on the HT-5 while movers transported the Z-5CD transmitter from the temporary shed to the new building at the end of May 2009. Considering that the spring 2009 rating survey would be well underway before we cut over, we wanted to reduce the amount of time we had to be on the auxiliary site down the road operating at 10 percent power.
In the second week of June 2009, the Harris Z 5CD was finished being wired into the facility, tested and subsequently put on the air. Countless hours were poured into the reconstruction of the WILQ transmitting installation. Our plan was to rebuild it to be professional and reliable. It is now finished and thankfully this chapter in the history of Backyard Broadcasting's WILQ is now closed.
Atkins is VP, director of engineering of Backyard Broadcasting, Buffalo, NY.
Bird 5kW load
Dielectric Model 50000
Harris HT-5, Z-5CD
Myat 1-5/8" coax, couplings, field flanges, and 90-degree elbows
Onan 15kW genset
Xcel CPS A1/A2
Acceptable Use Policy blog comments powered by Disqus
[an error occurred while processing this directive]
Today in Radio History
The history of radio broadcasting extends beyond the work of a few famous inventors.
EAS Information More on EAS
The feed provides feeds for all US states and territories.
Need a calendar for your computer desktop? Use one of ours.
Information from manufacturers and associations about industry news, products, technology and business announcements.
When building its new broadcast production vehicle, MRN applied lessons learned from the past.
Browse Back Issues[an error occurred while processing this directive]
Also in the April Issue
- Update on Transmitters
- On-air Missteps to Avoid
- Tower Lease Renegotiation
- New Products
- Applied Technology: Streaming with the MPEG HE-AAC Audio Codec
- Side by Side: Studio Furniture
- Practical Use: Circulators and Isolators