Most Popular Articles
CBC/Radio-Canada's French Radio Service Upgrades Facilities
Transition to a fully digital infrastructure enables centralized network operations
Determined to increase operating efficiencies by having a more advanced means of gathering and managing program material from multiple sources located throughout Canada, CBC/Radio-Canada's French Radio Service (Radio de Radio-Canada) has reached a lofty milestone in its multi-year plan to enhance its facilities. In July, the Montreal broadcast operations center completed a major phase that dramatically upgraded the radio master control center, including the replacement of a legacy analog switcher that had maxed out its capacity and had no provisions for expansion. Following an extensive evaluation of its facilities and operations, determining a course of action that would allow for future growth, and completing contract negotiations, a new central audio router and control system for all of Radio-Canada's radio production and distribution was put into service.
The Toronto office of Rastatt, Germany-headquartered Lawo, known for its digital audio networking and console systems, was awarded the contract to deploy a system incorporating its router and audio networking technologies in conjunction with VSM (Virtual Studio Manager) control software. Radio-Canada's new system includes the Lawo DSHS (Dual Self-Healing Star) router configuration with two fully redundant Nova 73 router cores – one located in the radio master equipment room and the other in the TV master equipment room. Each router is equipped with 54 MADI ports, three DSP boards that process 184 signals each, and 19 Lawo Dallis frames for input/output.
Michel Leduc, broadcast engineering manager for CBC/Radio-Canada's French Services, commented on the extent of the facility upgrade, "We were aware of several new projects on the horizon that required greater switcher capacity, so the necessity of upgrading our broadcast center was vital. We were looking for state-of-the-art technology that offered expansion, reliability, along with the possibility of having control and DSP capabilities."
The Lawo DSHS routing system utilizes a de-centralized architecture that literally spans all areas of the Montreal broadcast complex. For full system redundancy, each Dallis frame is connected to both Nova 73 HD cores. The DSHS system utilizes a special application for the Nova 73 router whereby all potential single points of failure – including the rack and room where the main frames reside – are doubled. A link between the two cores ensures that if the radio core fails, the TV core will assume responsibilities. Of equal significance, if any partial failure occurs, the alternate core can assume those functions while the remaining tasks are managed by the partially impaired core.
Support for existing hardware was deemed crucial to enable the project to move forward in phases – thus enabling Radio de Radio-Canada to better manage the revitalization process from both operational and financial perspectives. "We have a number of existing Pro-Bel HD series MADI frames and Studer mixing consoles that remain operational," Leduc says. "The old Pro-Bel switcher is based on MADI communication between the I/Os and the core. To avoid replacing all the existing analog feeds, the MADI feeds are tied to the Lawo core. This arrangement enables us to continue using the existing analog feeds and helps CBC/Radio-Canada make the transition to a fully digital infrastructure while maintaining interim support for legacy hardware. Equally important, this setup helps us control our costs."
Managing the new signal routing capabilities is a VSM-based application jointly developed by Lawo and Radio-Canada personnel with a significant amount of support from Bingen-Germany-based L-S-B Broadcast Technologies, the developers of Virtual Studio Manager. Encompassing more than 34 PC-based stations with a combination of virtual panels, custom designed touch screens, or mouse control panels, the software provides a highly integrated control and management system for Radio de Radio-Canada's MCR (master control room) operation. On any two independent workstations, two operators can handle the entire system. "Our other key challenge with this project," Leduc says, "was to develop an easy to use GUI (graphical user interface) that offered the necessary amount of alarms and other features to facilitate our present and future on-air radio operations."
Jean-Marc Gellatly, director of production studio radio and radio operations at Radio de Radio-Canada, commented on the considerable technological leap this represents, "We knew that today's cutting-edge technology would allow us to completely rethink how the MCRs of the future would be managed and operated and, with this implementation, we are positioned to maximize radio's role in a completely integrated content company."
The Radio-Canada/Lawo-designed VSM software includes provisions for metering upward of 72 stereo streams as well as automatic multilayer apology, fading, alarm logging and processing for more than 150 on-air busses. The system incorporates Avocent 5010 KVM management (a switcher system for assigning control functions to any of the 100+ various computer stream/keyboard/mouse stations) and offers sophisticated XY control of 4,000 × 4,000 mono signals – the new system's present capacity. Additionally, the VSM software provides integrated alarm monitoring and logging for all Lawo components. Depending upon the actual screen/function an operator is working on, the VSM system provides tremendous flexibility in tracking all source and destination signal routing, the ability to view color-coded alarm displays for managing the status of all automated output busses, along with processing panels to address alarm conditions, plus numerous other functions.
--Continued on page 2
Acceptable Use Policy blog comments powered by Disqus
[an error occurred while processing this directive]
Today in Radio History
The history of radio broadcasting extends beyond the work of a few famous inventors.
Read each issue online in our Digital Edition Format in your Web browser.
EAS Information More on EAS
The feed provides feeds for all US states and territories.
Need a calendar for your computer desktop? Use one of ours.
Information from manufacturers and associations about industry news, products, technology and business announcements.
Browse Back Issues[an error occurred while processing this directive]
Also in the March Issue
- The "And More" of Automation
- FCC Enforcement Items to Watch
- Testing AM Antennas
- New Products
- Field Report: Cloud Microphones Cloudlifter CL-1
- New Products at the 2014 NAB Show
- Side by Side: IP Codecs