Field Report: IsoAcoustics ISO-L8R 155

        Radio on FacebookJoin us on Facebook

This studio doubles as a morning show broadcast room and the space is limited for the speakers - meaning there is only one place to put the monitors: on a shelf behind the person running the computer and console. The shelf is an old plywood shelf built into the studio wall and sits about 4' above the head of the production person's head. The older shelf is used to store CDs for the production library and yes there are some records and carts up there. The records are mostly for nostalgia anymore, but the carts are still in use due to our morning DJ being blind and still using carts. With all that plastic on the shelf we get a lot of vibration. Sometimes the vibration is not noticeable but when I push some serious bass through the system, you can hear the buzz. Another issue is that the speakers face straight shooting the sound straight over the head of the production person.

The ISO-L8R 155 allowed me to compensate for both problems. I was able to angle the monitors downward without fear of them falling on my head and without trying to hang the monitors. The rubber isolators built into the stands cut out all vibration. I played the Queen song "Dragon Attack" with its serious bass riff, and the shelf was free of vibration. With the speakers angled down, I finally got the full stereo effect of my production.

Another room

I then tried these stands in my professional studio, which is in the basement of a business I have recently opened. The problem with the monitor speakers here is when the system was turned up loud the bass created the vibration, which could be heard, and sometimes felt, upstairs. The upstairs is a gaming store, and when the customers are playing tournaments when I'm mixing audio it can be a distraction. The studio is still in its being-built phase so eventually we will have the room sound dampened so this won't be a problem, but I thought this would be a suitable test for these stands. The bass vibration was cut to a minimal/acceptable level that worked out nicely. My solution before was to set the monitors on mattress foam, and that did the trick, but looked nowhere near as professional as these stands. These look good while doing the job at the same time. I was also able to raise the speakers higher than before and again fully enjoy all the sound.

The final test was my home studio. I have a very small space and being my home I have not been ready to commit to mounting my speakers by hanging them from the ceiling. What if I want to change the mixer location? Then I'd have to rehang, and maybe re-cut the chain. These stands fit perfectly on my desk, which not only serves as my production console but also as just my work desk where my computer sits that does more than only audio production - a guy's gotta have his games.

Changing the height and tilt of the monitor speakers is very easy with this kit. Simply place the bars into the holes, and if you need the tilt, add the inserts into the side you need raised. I saw it as Tinkertoys for the audio engineer. In fact toying around with the pieces is almost fun.

◊ 905-294-4672

Having the vibrations cut out and the ability to change monitor height and angle makes these stands a nice addition to any studio.

Wilson is an announcer, producer, webmaster and promotions guy at WAKO-AM/FM, Lawrenceville, IL, and an independent producer/voice talent.

Acceptable Use Policy
blog comments powered by Disqus

[an error occurred while processing this directive]

Today in Radio History

Milestones From Radio's Past

The history of radio broadcasting extends beyond the work of a few famous inventors.

EAS Information More on EAS

NWS XML/Atom Feed for CAP Messages

The feed provides feeds for all US states and territories.

Wallpaper Calendar

Radio 2014 Calendar Wallpaper

Need a calendar for your computer desktop? Use one of ours.

The Wire

A virtual press conference

Information from manufacturers and associations about industry news, products, technology and business announcements.

Join Us Facebook Twitter YouTube LinkedIn
Radio magazine cover

Current Issue

National Public Radio

Building For The Future

Browse Back Issues

[an error occurred while processing this directive]