Field Report: Broadcast Devices DAB-300


        Radio on FacebookJoin us on Facebook

Taking control

A connector break-out panel is available to simplify connections.

A connector break-out panel is available to simplify connections.


The remote controls of the DAB-300 are what you would expect (for our semi-custom version we added some). By way of contact closures, you can change the inputs and there is status that reflects those changes so that you can tell what input is routed to the outputs. You are also provided with an input to set the unit to manual mode, as well as one to set it to auto mode. You will have to switch the unit to manual mode before changing inputs remotely. Unfortunately there is not a remote status to tell you what mode it is in.

Our plan was to use the DAB-300 not only as an analog composite switch, but as an AES3 switch as well. The two groups of switches in the DAB-300 operate in parallel and sync with each other. We have three analog composite sources, and each of those composite feeds has an AES3 replica. All six are fed to the DAB-300. When the unit is switched to the primary STL, our analog transmitters and HD Radio transmitter are fed by the same audio processor (and same program source from our studio HQ). When switching to our backup STL, again the AES3 feed is a replica of the composite feed; this extends to our tertiary STLs as well.

The composite switch that is built-in to our unit feeds a four-output DA that has a fixed gain of unity. Another feature that we asked for was a set of status outputs (by way of relay contacts) that correspond to silence on all six STL sources.

Broadcast Devices
P
W
E
914-737-5032
www.broadcast-devices.com
sales@broadcast-devices.com

The only caveat I have for potential users: Plug the DAB-300 in to a UPS. The unit has a switch-mode power supply that detects brief ac input hits. Unless the ac power is gone longer than about 3 seconds, the power supply will not come up. We're very pleased with the functionality of our DAB-300s as well as with our experience with the team at BDI, who worked closely with us to meet our requirements. I have been told now that the engineering is done, our particular application is no longer semi-custom, and is available to other users should they have the same requirements.


Irwin is transmission systems supervisor for Clear Channel NYC and chief engineer of WKTU, New York. Contact him at doug@dougirwin.net.


Editor's note: Field Reports are an exclusive Radio magazine feature for radio broadcasters. Each report is prepared by well-qualified staff at a radio station, production facility or consulting company.
These reports are performed by the industry, for the industry. Manufacturer support is limited to providing loan equipment and to aiding the author if requested.
It is the responsibility of
Radio magazine to publish the results of any device tested, positive or negative. No report should be considered an endorsement or disapproval by Radio magazine.




Acceptable Use Policy
blog comments powered by Disqus

[an error occurred while processing this directive]

Today in Radio History

Milestones From Radio's Past

The history of radio broadcasting extends beyond the work of a few famous inventors.

Digital Edition

Each Issue as a Digital Edition

Read each issue online in our Digital Edition Format in your Web browser.

EAS Information More on EAS

NWS XML/Atom Feed for CAP Messages

The feed provides feeds for all US states and territories.

Wallpaper Calendar

Radio 2014 Calendar Wallpaper

Need a calendar for your computer desktop? Use one of ours.

The Wire

A virtual press conference

Information from manufacturers and associations about industry news, products, technology and business announcements.

Join Us Facebook Twitter YouTube LinkedIn
Radio magazine cover

Current Issue

Powered by NASH: Cumulus Delivers Country From Nashville

Cumulus builds a new campus in Nashville to house its NASH family of brands

Browse Back Issues

[an error occurred while processing this directive]