Field Report: Yamaha Stagepas 300

        Radio on FacebookJoin us on Facebook
Yamaha Stagepas 300

Radio station remote broadcasts seem like simple ideas, but at times they can be as difficult to figure out as quantum physics. The lonely remote broadcast engineer is always the first to arrive and the last to leave. In many cases the engineer isn't a full time engineer, but maybe an intern rooked into setting up the broadcast, or even the promotions person who also takes care of everything else in the remote broadcast. Sometimes the difficulty level of a remote is unknown until the time of the broadcast. If you have the dedicated remote engineer advantage then you can solve all problems as they arise by some MacGyver-like workarounds.

Along with the remote connection to the studio, a sound system has to be set up. I've seen everything from a boom box to a huge PA with 3' tall speakers being used in a remote. When it comes to a PA pumping to the locale, you don't want overkill, but you don't want to under do it. Here's where the Yamaha Stagepas 300 PA system fits. This dynamic system is a great middle-of-the-road starter point. This system pumps out 150W per channel with crisp highs punchy mids and big, fat bass. The Stagepas 300 delivers a clear, powerful sound. Its rugged, durable construction and easy setup make for the perfect remote broadcast PA for any situation.

Performance at a glance
150W per speaker output
20Hz-20kHz frequency response
70W power consumption
Speakers measure 10.8" x 18.0" x 10.0"
Mixer measures 11.4" x 3.8" x 6.3"
Total weight 39.7lbs

The right size

The Stagepas 300 can fill a noisy bar, a 300-person lecture hall, or the small conference room-type setting with ease. I even tested it outside and the sound filled the outdoors with nice distribution in an area equal to a little league baseball field. The entire unit (including the mixer) fits in the space of two speakers that measure 10.8" W x 18" H x 10" D. This all-in-one system includes a pair of passive speakers, a detachable powered mixer, and a pair of speaker cables. The eight-channel powered mixer can be used either while installed in the speaker compartment or detached for easy positioning and access. So basically all that has to be carried for PA purposes are the two speakers. One speaker is storage for the mixer (removed with a simple locking screw) and the other has space for the power and speaker cables with room left for a microphone and cable.

Let's look at the mixer setup. There are eight input channels with channels 5/6 and 7/8 blended together for stereo inputs. Channels 1-4 are mono inputs accepting either XLR or 1/4" phone jacks. These channels have an equalizer section to adjust high and low frequencies with a range of ±15dB (high and low each have their own pot). They also have a button to determine mic or line level input. These four channels also have the option for adding reverb.

-- continued on page 2

Acceptable Use Policy
blog comments powered by Disqus

[an error occurred while processing this directive]

Today in Radio History

Milestones From Radio's Past

The history of radio broadcasting extends beyond the work of a few famous inventors.

Digital Edition

Each Issue as a Digital Edition

Read each issue online in our Digital Edition Format in your Web browser.

EAS Information More on EAS

NWS XML/Atom Feed for CAP Messages

The feed provides feeds for all US states and territories.

Wallpaper Calendar

Radio 2014 Calendar Wallpaper

Need a calendar for your computer desktop? Use one of ours.

The Wire

A virtual press conference

Information from manufacturers and associations about industry news, products, technology and business announcements.

Join Us Facebook Twitter YouTube LinkedIn
Radio magazine cover

Current Issue

National Public Radio

Building For The Future

Browse Back Issues

[an error occurred while processing this directive]