Most Popular Articles
Cutting Holes in Laminate
Last month I talked about drilling holes in Corian countertops. There are probably more sets of studio furniture out there with laminate tops though, so let's talk about drilling holes in those.
I put the following question to Rod Graham of Graham Studios. What's the best way to cut holes in laminate furniture?
"Most often we see the use of a Forstner Bit when precision is required. While these bits are primarily used in a drill press, with a little practice, they can be used in a hand held drill. They are similar to other drills in that they have a center point to help start the hole. The outer rim however, is the guide to ensuring that holes greater than 2" in diameter, are perpendicular to the surface. While Forstner bits are more expensive than center point drills, they create cleaner and larger holes than the center point drill. A less expensive hole saw/arbor can be substituted for the Forstner bit. Buy two or more saws as they will get dull half way through the first hole."
What about larger holes, though, like one that would be beneath an equipment turret?
"The use of a router and template is the best way to cut holes in laminate (HPL) table tops. The template is clamped to the surface to prevent movement, and the router is then used to plunge through the top. This method is usually used in professional mill work environments where dust collection systems are used. Rectangles can also be cut with a jig saw, a steady hand, and 1/4" holes at the corners. Use 2" wide masking tape to prevent chipping of the laminate, as well as scratches from the base plate of the jig saw. Some black paint will dress up the non-standard hole."
Irwin is RF engineer/project manager for Clear Channel Los Angeles. Contact him at email@example.com.
Acceptable Use Policy blog comments powered by Disqus
[an error occurred while processing this directive]
Today in Radio History
The history of radio broadcasting extends beyond the work of a few famous inventors.
Read each issue online in our Digital Edition Format in your Web browser.
EAS Information More on EAS
The feed provides feeds for all US states and territories.
Need a calendar for your computer desktop? Use one of ours.
Information from manufacturers and associations about industry news, products, technology and business announcements.
When building its new broadcast production vehicle, MRN applied lessons learned from the past.
Browse Back Issues[an error occurred while processing this directive]
Also in the April Issue
- Update on Transmitters
- On-air Missteps to Avoid
- Tower Lease Renegotiation
- New Products
- Applied Technology: Streaming with the MPEG HE-AAC Audio Codec
- Side by Side: Studio Furniture
- Practical Use: Circulators and Isolators