Most Popular Articles
Nott Ltd. Copperweld
Nott now distributes Copperweld grounding wire. This wire has been used by the electric utility industry for many years and just now comes to broadcasting. Standard Copperweld wire is not annealed, making it very springy. However, the ground wire is annealed and handles just like pure copper wire. It can also be silver soldered like pure copper. Tests indicate erosion may occur at the ends of buried wires but will go no more than two wire diameters into the metal. In the case of #10 wire, this is less than 1/4". RF current travels only on the outer surface of a wire due to skin effect, so most of the current will be flowing in the copper skin. Bending it into a sharp radius does not cause the copper skin to crack. Wrap it as tightly as needed, then silver-solder it.
Do you have experience with this product? Share your comments below.
Acceptable Use Policy blog comments powered by Disqus
[an error occurred while processing this directive]
Today in Radio History
The history of radio broadcasting extends beyond the work of a few famous inventors.
Read each issue online in our Digital Edition Format in your Web browser.
EAS Information More on EAS
The feed provides feeds for all US states and territories.
Need a calendar for your computer desktop? Use one of ours.
Information from manufacturers and associations about industry news, products, technology and business announcements.
Browse Back Issues[an error occurred while processing this directive]
Also in the December Issue
- Local Radio Spotlight: Koser Radio Group
- Trends in Technology: Streaming Audio Update
- Contest Rules Rewrite and EAS Issues
- Embedded Computing, With a Side of Pi
- Field Report: TASCAM US-366