Most Popular Articles
Henry Engineering Powerclamp Series 10
Powerclamp Series 10 wire-in parallel TVSS devices are rated at 200,000 surge amps per phase, and will suppress lightning-induced transients, massive high energy surges, and power line spikes. Their surge suppression will greatly reduce equipment failures and computer lockups that are caused by power line disturbances. Operation is not affected by the power requirements of the load. Each line phase is fused, with a fuse status lamp. An unlikely failure will not interrupt power to the load. The Series 10 offers optional remote failure detection to monitor the suppression integrity of the device from a remote location. A Series 10 unit should be installed at the main entry electrical panel in any environment where frequent and severe lightning occurs.
Do you have experience with this product? Share your comments below.
Acceptable Use Policy blog comments powered by Disqus
[an error occurred while processing this directive]
Today in Radio History
The history of radio broadcasting extends beyond the work of a few famous inventors.
Read each issue online in our Digital Edition Format in your Web browser.
EAS Information More on EAS
The feed provides feeds for all US states and territories.
Need a calendar for your computer desktop? Use one of ours.
Information from manufacturers and associations about industry news, products, technology and business announcements.
Browse Back Issues[an error occurred while processing this directive]
Also in the November Issue
- Trends in Technology: HD Radio Transmission Update
- Franken FM Stations
- Wi-Fi on Wheels: The Connected Car
- Field Report: Yamaha MG10XU
- Transmitter Site Cleanup