Most Popular Articles
HD Radio Delay Settings Get Low Marks in Southern California
San Marcos, CA - Oct 15, 2007 - Brian Beezley, an engineer in southern California, has a passion for RF. He has reviewed several HD Radio receivers and has posted his research on his website. On Oct. 14 and 15, he took advantage of his location to investigate a common setting for HD Radio: the analog/digital delay.
The hybrid-mode signals should be time-aligned to make the blend from analog to digital a smooth one. When the time alignment is not set properly, the blending can be an unusual phase-shifting effect during the transition to a complete dropout. The severity of the effect depends on the mismatch of the signals.
Beezley posted his results online, and the details are not complimentary to many of the stations he received. His post is quoted below.
I decided to measure the time alignment of every FM HD Radio station I could receive here in San Marcos, northern San Diego County.
A reasonable time-alignment error limit is a few samples (less than 100 microseconds). This will place any delay-induced spectral notches well above the midrange. I had hoped to list errors in microseconds, but after tuning around a bit I realized I had to relax my expectations. Below are the errors I measured rounded to the nearest millisecond. Positive means that the digital signal lags the analog. I drove a computer sound card with a Sangean HDT-1X in split-channel mode, with the analog signal on one channel and the digital on the other. I visually compared waveforms and used a cursor to measure large errors. To measure errors below 100ms, I used a waveform normalizing and differencing program.
Note that a timing error of just 1ms causes pronounced spectral notches to occur at 500Hz, 1.5kHz, 2.5kHz, etc., during the analog/digital blend. This artifact is distinctly audible. Some of the errors below may be due to broadcast engineers who don't take signal alignment seriously. Others may be due to clock slips that in some cases can irrevocably undo a careful alignment.
Freq Station Error 88.1 KKJZ 0 88.7 KQSC 40 89.3 KPCC 0 89.5 KPBS 2 89.9 KCRW 0 91.1 KDSC 40 91.5 KUSC 5 92.3 KHHT 0.1 93.1 KCBS 0* 93.3 KHTS -1 93.9 KMVN 0* 94.1 KMYI -0.2 95.5 KLOS 0 95.7 KUSS 2 96.5 KYXY 172 97.1 KLSX -2 97.3 KSON 0.2 97.5 KLYY 248 98.7 KYSR 0 99.7 XHTY 9972 99.9 KGGI -89 100.3 KRBV -103 101.1 KRTH -58* 101.5 KGB -3 101.9 KSCA 0 102.7 KIIS 0 103.7 KSCF 66 103.9 KRCD -0.1 104.3 KBIG -0.1 105.1 KKGO 0* 105.3 KIOZ 2 105.9 KPWR 0 106.7 KROQ -44 107.5 KLVE -0.1 107.9 KWVE 9
* Analog and digital signals are out of phase resulting in audio drop-out during blend.
The results may be indicative of a wide-spread problem. There are several known cases of stations not properly aligning their signals. Beezley's report is posted at ham-radio.com/k6sti/roster.htm.
Acceptable Use Policy blog comments powered by Disqus
[an error occurred while processing this directive]
Today in Radio History
The history of radio broadcasting extends beyond the work of a few famous inventors.
EAS Information More on EAS
The feed provides feeds for all US states and territories.
Need a calendar for your computer desktop? Use one of ours.
Information from manufacturers and associations about industry news, products, technology and business announcements.
When building its new broadcast production vehicle, MRN applied lessons learned from the past.
Browse Back Issues[an error occurred while processing this directive]
Also in the April Issue
- Update on Transmitters
- On-air Missteps to Avoid
- Tower Lease Renegotiation
- New Products
- Applied Technology: Streaming with the MPEG HE-AAC Audio Codec
- Side by Side: Studio Furniture
- Practical Use: Circulators and Isolators