Kintronic Labs Kinstar
More and more communities and neighborhoods across America are growing tired of the proliferation of cellular telephone towers, resulting in the establishment of revised local zoning laws for new structures that reflect a lowering of the maximum allowable height. Star-H Corporation and Kintronic Labs are now able to offer a solution for AM non-directional station operators. The Kinstar antenna conceived by Star-H Corporation, particularly Dr. James Breakall, professor of electrical engineering at Penn State University, was developed into a marketable broadcast product by Kintronic Labs. The Kinstar was officially type-accepted by the FCC on October 25, 2005, for full-time omnidirectional operation in the AM band in the U.S. market in accordance with Public Notice DA 05-2741 entitled Media Bureau Adopts Simplified Application Procedures for AM Nondirectional Kinstar Antennas.
On Jan. 11, 2009, the first Kinstar antenna was placed on the air by KCST-AM in Florence, OR, operating on 1250kHz with 900W daytime power and 37W nighttime power. KCST owner, Jon Thompson, needed to replace his 57.89 meter tower. His contract engineer, R. Sparks Scott, recommended he consider the Kinstar antenna, which, following further investigation with his consulting engineer, Bob McClanathan, P.E., he decided to install at a location 1.3 miles northeast of his old tower site. As his frequency of 1250kHz, he has a maximum height above the ground of 70' with the Kinstar, which fit well with the local zoning height restriction of 72'. Also realizing he would have no tower painting required with the Kinstar, Thompson saw the decision to go with the Kinstar as a logical move that would save substantially on long term maintenance costs.
The Kinstar antenna design licensed by the FCC as a top-loaded antenna is shown in Figure 1.
The KCST Kinstar was designed in accordance with the scaled electrical dimensions defined by the experimental antenna operated under FCC experimental license WS2XTR for operation on 1680kHz. With an electrical height of 63' and top loading of 134 feet the KCST Kinstar operating on 1250kHz was installed with five 85' wooden utility poles, and standard pole line hardware and cable in one and a half days by a utility company out of Portland. All of the anchors were screw anchors buried in the soil using a hydraulically-driven auger; therefore, no concrete was required in the installation. A 120-radial quarter wave ground system was installed following the antenna installation.
A photo of the feed point at the base of the center pole of the Kinstar antenna is shown in Figure 2. An overall view of the KCST Kinstar antenna is shown in Figure 3.
With the height of the Kinstar pole supports falling below the average height of trees in the nearby forest, the antenna blends into the background rendering it invisible to the passers by on the coastal highway. As a result, the Kinstar is clearly an environmentally friendly antenna technology.
Acceptable Use Policy blog comments powered by Disqus
[an error occurred while processing this directive]
Today in Radio History
The history of radio broadcasting extends beyond the work of a few famous inventors.
EAS Information More on EAS
The feed provides feeds for all US states and territories.
Need a calendar for your computer desktop? Use one of ours.
Information from manufacturers and associations about industry news, products, technology and business announcements.
Staying on-air is priority #1, but 100 percent redundancy comes at a cost.
Browse Back Issues[an error occurred while processing this directive]
Also in the November Issue
- Music is Everywhere at WTMD
- FCC Looks to Update RF Exposure Rules
- Government Shutdown Causes FCC Delays
- Applied Technology: Wheatstone baseband192
- Side by Side: Video Cameras
- Exploring More from Google Earth
- The History of W9BSP